How to start the ATV quickly? It is recommended that you start with the following five startup steps.
1. Straighten the direction handle and tighten the screws.
2. Add electrolyte to the battery to make it react naturally for 30 minutes, and then connect the cable, the red is connected to the positive "+", and the green is connected to the negative "-".
3. When picking up the car, bring more than 4 liters of No. 93 gasoline and refill it in the fuel tank.
4. Turn the ignition switch lock to energize the whole vehicle, and the key position of the engine flameout switch should be in a long connection state. And hang the engine gear on the neutral "N", the instrument and gear light show "N". (At this time, the name of the handle held by the left hand changes according to different styles of cars.) Hold the clutch handle, parking handle or rear brake handle with the left hand, push the accelerator lightly with the thumb of the right hand, and press the red start button with the index finger of the left hand to start the engine. (If your car has a damper, please push the damper handle to the direction of the arrow first, it will help to start smoothly. After the engine starts working for 2-3 minutes, push the damper handle back to the position, then the engine is in good working condition .
5. After unpacking, be sure to carefully read the operating labels and instructions on the car.
