Domestic ATVs are becoming more and more popular, and many off-road enthusiasts are involved. Driving ATVs off-road is often driven on complex road conditions such as beaches, forest roads, and mud. Although ATVs are fully capable of these roads, they often drive on complex roads. Care and maintenance should be done. So, how to maintain and maintain the ATV?
Basic maintenance method of ATV:
1. The air filter, carburetor, oil filter and fuel switch must be cleaned and inspected every month.
2. Check the connectors of the cable connectors of the whole vehicle to see if they are in good condition.
3. The vehicle must always be kept clean and tidy, and a start-up inspection must be done after cleaning the vehicle.
4. When the vehicle is parked for a long time, the gasoline in the carburetor room should be cleaned, and the battery should be removed and stored after charging. It is best to charge the battery once a month.
5. Check and adjust the clutch, check the operating parts of the accelerator and brake, and add lubricating oil to the cable.
6. For the replacement of oil, the time point is generally, the first oil change after driving about 1000 kilometers or 20 hours, the second oil change is about 5000 kilometers or 100 hours, and the motorcycle engine oil is used. (It is best to discharge the engine oil when the engine is hot, so that the cleaning is more thorough. Vehicles used in alpine regions in winter should be replaced with oil suitable for alpine regions.)
7. If it is driven by a chain, the chain should be kept clean to avoid friction and damage to it by sand and sand, and lubricating oil should be injected at the same time.
